EN
Better quality
Better QualityBetter service
Better Quality
The Largest Manufacturer of MTHPA Products in China.

What Is The Fastest Way To Cure Epoxy Resin

Epoxy resin belongs to an organic chemical, which is suitable for use on the floor when decorating. At the same time, this product has strong corrosion resistance, which is also an electrical insulation product.

To put it simply, this is actually a chemical raw material. It is known that the cured epoxy resin has good physical and chemical properties, as well as that is has good bonding strength and electrical properties for the surface of metal and non-metal materials. It has small shrinkage, good dimensional stability, high hardness and good flexibility. At the same time, it is relatively stable to alkali and most solvents, which can be widely used in various departments of national defense and national economy.

How does epoxy resin dry fast

Epoxy resin can be said to account for a large proportion in coatings, making products with different characteristics and uses. Epoxy resin has excellent chemical resistance, especially alkali resistance. The adhesion of paint film is strong, especially for metal. Epoxy resin also has good heat resistance and electrical insulation, but we should pay attention to some details when painting, so that the epoxy resin can dry faster.

Increase temperature: Saying from the aspect of the theory, the curing speed of the product can be doubled for every 10℃ increase in temperature.

Increase the amount of accelerant: for example, the more the accelerant is, the faster the curing will be.

Change the type of accelerant: It's better to use a more active accelerant. But here we should pay attention to the higher activity, its latency is poor, if it is a single component product, you can find a balance, but for the two components, you do not consider this.

Curing agent adding dosage: It can be considered that changing the curing dose will change the structure of the cured product, which will also change the performance of the paint film or coating or products,  and it must be considered clearly.

Change the type of curing agent: This is also able to use a higher activity of curing agent, which has the similar risk to 3 and 4 points, and the use should be paid attention to, which is better to test in advance.

Adding highly active ingredients, such as substituting o-Cresol-Formaldehyde epoxy for bisphenol A epoxy, which can be said that there are certain risks in using this kind of epoxy.

Use of high solid epoxy or powder epoxy to reduce solvent evaporation time.

Epoxy resin is widely used in coatings, so it is very important to master the relevant theoretical knowledge and operation skills.
Related News
  • What Is Epoxy Hardener Made Of

    What Is Epoxy Hardener Made Of

    June 5, 2019The epoxy resin itself is a thermoplastic linear structure. After heating, the solid resin can be softened and melted into a viscous or liquid state. The thermal viscosity of liquid resin decreases. O...view
  • Usages and Properties of MTHPA (MeTHPA)

    Usages and Properties of MTHPA (MeTHPA)

    May 28, 2019Speaking of methyl tetrahydrophthalic anhydride, MTHPA (MeTHPA), everyone would be very strange, but it is often found in our lives, sometimes in the paint used in the renovation of new homes containi...view
  • Common Sense of Tetrahydrophthalic Anhydride

    Common Sense of Tetrahydrophthalic Anhydride

    May 28, 20191. Storage methodKeep the container sealed and store in a cool, dry place to prevent moisture.2. The synthesis methodAdd maleic anhydride to the reaction vessel, heat until it is completely melted, ad...view
  • What is Methyl Tetrahydrophthalic Anhydride?

    What is Methyl Tetrahydrophthalic Anhydride?

    May 28, 2019Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is used in a wide range of applications. What are the characteristics of methyl tetrahydrophthalic anhydride? What is the scope of the specific use?...view
  • What Is The Ratio Of Epoxy and Hardener?

    What Is The Ratio Of Epoxy and Hardener?

    June 5, 20191. Amine curing agentsW(mass fraction of amine curing agent required for 100 mass fraction resin)/%=(amine equivalent/epoxy equivalent)*100 mass fraction resin=(molecular weight of amine*100 mass frac...view
  • Briefly Explain the Application Relationship between Epoxy Resin and Curing Agent

    Briefly Explain the Application Relationship between Epoxy Resin and Curing Agent

    May 28, 2019Epoxy resin is a kind of thermosetting polymer synthetic material with good bonding, corrosion resistance, insulation and high strength. It has been widely used in the bonding of a variety of metal an...view


Contact Us