EN
Better quality
Better QualityBetter service
Better Quality
The Largest Manufacturer of MTHPA Products in China.

Basic Information and Properties of MTHPA

Methyl tetrahydrophthalic anhydride is a chemical with a molecular formula of C9H10O3.

First, basic information.
Name: Methyl Tetrahydrophthalic Anhydride
Alias: 1,2,3,6-TETRAHYDRO-3-METHYLPHTHALIC ANHYDRIDE;
1-METHYL-5-CYCLOHEXENE-2, 3-DICARBOXYLIC ANHYDRIDE;
3-METHYL-DELTA4-TETRAHYDROPHTHALIC ANHYDRIDE;
3-METHYLTETRAHYDROPHTHALIC ANHYDRIDE;
4-METHYL-1,2,3,6-TETRAHYDROPHTHALIC ANHYDRID;
4-METHYL-4-CYCLOHEXENE-1, 2-DICARBOXYLIC ANHYDRIDE;
4-METHYL-DELTA4-TETRAHYDROPHTHALIC ANHYDRIDE;
4-METHYL TETRAHYDROPHTHALIC ANHYDRIDE;
4-MTHPA;
Numbering: B1030
CAS No:26590-20-5  11070-44-3

Second, basic performance.
Methyl tetrahydrophthalic anhydride, referred to as MTHPA, MeTHPA, has two isomers, namely 4-methyltetrahydrophthalic anhydride and 3-methyltetrahydrophthalic anhydride, having a melting point of 65 °C and 63 °C. It is rarely used as a curing agent alone. The actual commodity is a liquid mixture that isomerized to various isomers. The molecular weight is 166.17, and light yellow color, transparent oily liquid, relative density of 1.20 - 1.22. Freezing point < -20 °C. The boiling point is 115-155 °C. Viscosity (25 °C) 40 - 80 mPa · s. The refractive index is 1.4960 to 1. 4980. The anhydride group content is ≥ 40%. The neutralization equivalent is 81-85. The flash point is 137 - 150 °C. Soluble in acetone, ethanol, toluene, etc. It has good stability in air and is not easy to precipitate crystals. Low toxicity, LD502102mg/kg.


Related News
  • What Is The Ratio Of Epoxy and Hardener?

    What Is The Ratio Of Epoxy and Hardener?

    June 5, 20191. Amine curing agentsW(mass fraction of amine curing agent required for 100 mass fraction resin)/%=(amine equivalent/epoxy equivalent)*100 mass fraction resin=(molecular weight of amine*100 mass frac...view
  • Usages and Properties of MTHPA (MeTHPA)

    Usages and Properties of MTHPA (MeTHPA)

    May 28, 2019Speaking of methyl tetrahydrophthalic anhydride, MTHPA (MeTHPA), everyone would be very strange, but it is often found in our lives, sometimes in the paint used in the renovation of new homes containi...view
  • Methyl Tetrahydrophthalic Anhydride Curing Agent

    Methyl Tetrahydrophthalic Anhydride Curing Agent

    May 28, 2019Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is a chemical substance that is used in the processing of some materials. Some common curing agents have the use of methyl tetrahydrophthalic anhydr...view
  • What Is Epoxy Hardener Made Of

    What Is Epoxy Hardener Made Of

    June 5, 2019The epoxy resin itself is a thermoplastic linear structure. After heating, the solid resin can be softened and melted into a viscous or liquid state. The thermal viscosity of liquid resin decreases. O...view
  • How To Avoid Epoxy Resin Cloudy

    How To Avoid Epoxy Resin Cloudy

    June 5, 20191. Reduce the purity of epoxy resin, such as adding other types of epoxy resin.2. Use epoxy resin with low crystallization tendency or without crystallization.3. Storage conditions: Storage temperatur...view
  • Is Epoxy Resin Heat Resistant?

    Is Epoxy Resin Heat Resistant?

    June 5, 20191. Epoxy resin AB adhesive classification: can be divided into epoxy resin filling adhesive, epoxy resin thermal conductive adhesive, epoxy resin sealant, epoxy resin high temperature adhesive, epoxy ...view


Contact Us